0102030405
iNET300/iNET900 Long-Range Industrial Wireless IP/Ethernet Solutions from China Suppliers and Factory
Wireless & Range
- Long range - Up to 90 miles
- High speed - Up to 512Kbps (iNET300) / Up to 1Mbps (iNET900)
- Long range wireless Ethernet
- Mobile network access for vehicle-based operation
Cyber Security
- Secure - multiple layers of cyber-security including:
- AES-128 encryption
- RADIUS authentication
- VLAN capability (802.1Q) allows multiple segregated data flows over a single radio
Connectivity & Design
- Ethernet and serial interfaces allow migration of existing serial devices to IP networks
- Industrial grade performance - UL Class 1 Div 2 & extended temperature range
- License free - deploy immediately
- Plug and play connectivity - configuration requires virtually no setup
- Gateway for serial/legacy networks to IP network
- Video and/or voice-over-IP
Why Use An iNET Wireless Networking Solution?
Longest Range
Industrial product in its class. Providing lowest cost of ownership.
Secure
Wireless operation with multiple layers of protection, including a 340/900MHz physical layer, RADIUS authentication and AES-128 data encryption with automatic key rotation.
Reliable Performance
Designed and built for low failure rates and reduced maintenance costs.
P21 Protection
The P21 protected Access Point (a chassis housing two radios in a cold standby configuration) increases the availability of mission-critical point-to-multipoint networks. P21 Remote stations can also be used to form protected point-to-point links.
Flexible Solution
The iNET supports multiple users connecting to multiple applications via multiple protocols on the same iNET unit or the same network - simultaneously!
Future Proof
The iNET adheres to open standards, allowing it to interface with a wide range of external devices enabling both new and old technologies to communicate.
Network Management
Compatible with NET view MS™ and any standard off-the-shelf SNMP management system.
Technical Specifications
| General | |
| Data Rate |
256Kbps/512Kbps (iNET300) 512Kbps/1Mbps (iNET900) User configurable air link 1,200-115.2 bps serial ports |
| Frequency Band |
336-344 MHz ISM band (iNET300) 902-928 MHz ISM band (iNET900) |
| Spreading Mode | DTS/FHSS |
| Range (iNET300-256Kbps) |
Typical fixed range: 25 miles Maximum fixed range: 90 miles Typical mobile range (parked): 8 miles Typical mobile range (moving): 5 miles |
| Range (iNET300-512Kbps) |
Typical fixed range: 15 miles Maximum fixed range: 25 miles |
| Range (iNET900-512Kbps) |
Typical fixed range: 25 miles Maximum fixed range: 90 miles Typical mobile range (parked): 8 miles Typical mobile range (moving): 5 miles |
| Range (iNET900-1Mbps) |
Typical fixed range: 15 miles Maximum fixed range: 25 miles |
| Available Configurations |
Access point/remote dual gateway - serial and ethernet Remote Ethernet Bridge - Ethernet Only Remote Serial Gateway - serial only P21 protected station - two radios in one chassis (cold standby) |
| Radio | |
| iNET 300 | |
| System Gain | 150dB @ 256 Kbps, 140dB @ 512 Kbps |
| Carrier Power | 0.5 to 5 / 5 to 25 watt |
| Modulation | CPFSK (continuous phase FSK) |
| Receiver |
-101dBm @ 256 Kbps with 10-6 BER -97dBm @ 512 Kbps with 10-6 BER |
| iNET 900 | |
| System Gain | 139dB @ 512Kbps, 134dB @ 1Mbps |
| Carrier Power | 0.1 to 1 / 1 to 15 watt |
| Output Impedance | 50 Ohms |
| Occupied Bandwidth | 600 kHz |
| Modulation | CPFSK (continuous phase FSK) |
| Receiver Sensitivity |
-97dBm @ 512 Kbps with 10-6 BER -92dBm @ 1Mbps with 10-6 BER |
| Physical Interfaces | |
| Ethernet | 10BaseT, RJ-45 |
| Serial |
COM1: RS-232/485/V.24, DB-9F, DCE COM2: RS-232/485/V.24, DB-9M, DCE |
| Antenna | TNC connector (female) |
| LEDs | Lan, Com1, Com2, power, link |
| Protocols | |
| Wireless | CSMA/CA (Collision Avoidance) |
| Ethernet | IEEE 802.3, Ethernet II, Spanning Tree (Bridging), IGMP |
| TCP/IP | DHCP, ICMP, UDP, TCP, ARP, Multicast, SNTP, TFTP |
| Serial | PPP, Encapsulation over IP (tunneling) for serial async multidrop protocols including Modbus, DNP.3, DF1, BSAP |
| Optional | Allen-Bradley EtherNET/IP*, Modbus/TCP |
| Cyber Security Suite, Level 4 | |
| Encryption | AES-128 with automatic key rotation |
| Authentication | 802.1x, RADIUS, EAP/TLS.PKI, PAP, CHAP |
| Management | SSL, SSH, HYYPS |
| Traffic Segregation | 802.1Q VLAN |
| Management | |
| Interfaces & Tools |
HTTP, HTTPS, SSH, TELNET, local console SNMPv1/v2/v3, MIB II, Enterprise MIB SYSLOG NETview MS™ |
| Environmental | |
| Temperature | -40℃ to +70℃ (-40°F to +158°F) |
| Humidity | 95% at 40℃ (104°F) non-condensing |
| Electrical | |
| iNET 300 | |
| Input Voltage | 10.5-16Vdc |
| Current Consumption |
Transmit: 1.2A (5W RF Output), 5.0A (25W RF Output) @ 13.8Vdc Receive: 203mA @ 13.8Vdc |
| iNET 900 | |
| Input Voltage | 10.5-30Vdc (1W), 10.5-16Vdc (15W) |
| Current Consumption |
Transmit: 510mA @ 13.8Vdc / 290mA @ 24Vdc (1W); 5.0A @ 13.8Vdc (15W RF Output) Receive: 200mA @ 13.8Vdc / 120mA @ 24Vdc |
| Mechanical | |
| Case Material | Die Cast Aluminum |
| Dimensions |
iNET 300: 3.8H x 20.3W x 10.2D cm (5W), 5.0H x 20.3W x 10.2D cm (25W) iNET 900: 3.15H x 17.2W x 11.2D cm (1W), 5.0H x 20.3W x 10.2D cm (15W) |
| Weight |
iNET 300: 1kg (5W), 1.2kg (25W) iNET 900: 908g (1W), 1.2kg (15W) |
| Mounting Options | Flat surface mount brackets, DIN rail, 19' rack tray |
| P21 Option |
Case Steel (rack mountable 2U) Dimensions: 8.9H x 48.3W x 35.6D cm (3.5H x 19W x 14D in) Weight: 7.6kg (14.7lbs) with transceivers |
| Agency Approvals | |
| Certifications |
FCC Part 15.247 UL/CSA Class 1 Div.21 IC |
Frequently Asked Questions
What is the maximum communication range of the iNET wireless networking solution?
The iNET system supports a long range of up to 90 miles for fixed configurations. In mobile environments, it typically covers up to 8 miles when parked and up to 5 miles when moving.
What data speeds and frequency bands do the iNET300 and iNET900 operate on?
The iNET300 operates on the 336-344 MHz ISM band with speeds up to 512Kbps. The iNET900 operates on the 902-928 MHz ISM band with high speeds reaching up to 1Mbps.
What security mechanisms are integrated into the Level 4 Cyber Security Suite?
The iNET features multiple layers of security protection, including AES-128 data encryption with automatic key rotation, RADIUS authentication, 802.1x, EAP/TLS.PKI, PAP, CHAP, SSL, SSH, HYYPS, and traffic segregation using 802.1Q VLAN.
How does the iNET system support legacy serial devices?
iNET features both Ethernet and serial interfaces (COM1 and COM2). It supports encapsulation over IP (tunneling) for serial asynchronous multidrop protocols including Modbus, DNP.3, DF1, and BSAP, allowing easy migration of legacy serial devices to IP networks.
What is the purpose of the P21 option configuration?
The P21 configuration features two radios housed in a single steel chassis (2U rack-mountable) in a cold standby layout. It increases network availability for mission-critical point-to-multipoint networks or protected point-to-point links.
What are the environmental and industrial certifications of the iNET units?
iNET units are designed for extreme conditions, supporting an extended temperature range of -40℃ to +70℃ and 95% non-condensing humidity. They are industrially certified under FCC Part 15.247, IC, and UL/CSA Class 1 Div. 2.