0102030405
High-Speed Frequency Hopping Radio & Module - FGR2(MMfrom Reliable China Suppliers & Factory
Improved Low Signal Performance: RISC - based signal demodulation with matched filter.
Versatility: A single radio can operate as a master, slave, repeater, or slave/repeater.
Unparalleled Signal Performance: GaAs FEI RF front end with multistage SAW filtering has unmatched combination of overload immunity and sensitivity.
High Noise Immunity: Superior performance in noise congested environments.
TDMA: Time Divisible Multiple Access available.
Data Rate: 115.2 - 153.6kbps
Secure: Proprietary spread spectrum technology prevents detection and unauthorized access; 128bit AES encryption available*.
Reliability: Every radio 100% tested for RF performance from -40℃ to +85℃.
Size & Performance: Smallest data radio with the highest performance available.
Efficiency: Low power consumption.
Certification: UL Approved**
MM2-T 902-928MHz
F50EX008 225-400MHz
Q508X600 228-235MHz
N920/N320/N425/N1350
Frequency Range: 902-928M/310-390M/410-480M/1.35-1.39GHz
MM2-T
Dimensions & Weight: 5.1×3.6×1.0cm, 14g
Interface & Connectors: TTL, 3.5/5.0V, MMCX
FGR2(N920/N320/N425)
Dimensions & Weight: 5.7x9.8x4.3 / 11.0x5.8x2.3cm, 228/136g
Performance: 153.6k/1.2Mbps, 232/485/422, 7-30V
MDS EL805 & Digi 9XTend Compatible
Compatibility Models: MDS EL805 compatible, Digi 9XTendcompatible
Specifications: 115.2kbps, 232/485/422, 7-30V
FGR2-multi-port
Dimensions & Weight: 11.4x9.8x4.3 / 8.7x5.4x2.2cm, 300/135g
Specifications: 153.6k/1.2Mbps, multi-port, 232/485/422, 7-30V
FGR2-15Watts
Dimensions & Weight: 15x12x6 / 11x8x4cm, 900/300g
Specifications: 19.2-345kbps, 232/485/422, 10.5-16V/4A
| Technical Specifications | ||||
|---|---|---|---|---|
| Transmitter | ||||
| Frequency Range | 902-928M / 225-400(228-235)M / 310-390M / 410-480M / 1.35-1.39GHz (FHSS)(DTS) | |||
| Output Power | 10mW to 1W, 1 to 2W (Military & report versions only) | |||
| Range - Line of Sight | 60 miles | |||
| Modulation | 2 level GFSK | |||
| RF Data Rate | Selectable speeds 115.2 to 153.6kbps (MM2), 115.2k to 1.2Mbps (N920/N320/N425/N1350) | |||
| Occupied Bandwidth | 230kHz / 611.2kHz | |||
| Hopping Patterns | 15 per Band, 105 total, user selectable | |||
| Hopping Channels | 50 to 112, user selectable | |||
| Hopping Bands | 7, user selectable | |||
| Frequency Zones | 16 Zones | |||
| RF Connector | MMCX (Straight) | |||
| Receiver | ||||
| Sensitivity |
-108(MM2) / -107(N1350) / -106(N920/N320/N425) dBm @ 115.2 kbps for BER 10-4 -103dBm @ 153.6 kbps for BER 10-4 / -100dBm @ 1.2 Mbps for BER 10-4 |
|||
| IF Selectivity | 40 dB at fc +/-230 kHz | |||
| RF Selectivity | 50 dB at 896 MHz, 935MHz | |||
| Dynamic Range | +10 dBm 3rd Order Intercept Point at Input Connector | |||
| Data Transmission | ||||
| Error Detection | 32-bit CRC, Retransmit on error | |||
| Data Encryption | Proprietary Spread Spectrum Technology | |||
| Data Interface | 1200bps - 230.4kbps | |||
| Data Connector | Straight 14-pin dual row header 2.0mm spacing | |||
| Data Throughput | 115.2-153.6kbps (MM2), 115.2k-1.2Mbps (N920/N320/N425/N1350) | |||
| Power Requirements | ||||
| Operating Voltage | MM2: +5 VDC (+/-5%), N920/N320/N425/N1350: 3.3 VDC (+/-3%) | |||
| Current (mA) | Mode | +5VDC (MM2) | +3.3VDC (N920/N320/N425) | +3.3VDC (N1350) |
| Operating Current | Transmit | 635mA | 1.3A | 100mA |
| Receive | 135mA | 160mA | 120mA | |
| Idle | 19mA | 20mA | 20mA | |
| Sleep | 6mA | 1mA | 1mA | |
| General Information | ||||
| Operating Temperature | -40℃ to +80℃ (-40℉ to +185℉) | |||
| Dimensions |
50.8 L x 36 W x 9.6 H (mm) (MM2) 32 L x 51 W x 6.35 H (mm) (N920/N320/N425/N1350) |
|||
| Weight | 14g (MM2), 18g (N920/N320/N425/N1350) | |||
| Humidity | 0 to 95% non-condensing | |||
Frequently Asked Questions
Q1: What is the maximum line-of-sight range of these data radios?
A1: These data radios offer an exceptional long-range performance of up to 60 miles under line-of-sight conditions.
Q2: What frequency bands do the N920, N320, N425, and N1350 modules support?
A2: The supported frequency ranges are 902-928MHz, 310-390MHz, 410-480MHz, and 1.35-1.39GHz depending on the specific model.
Q3: How secure is the data transmission on these devices?
A3: The systems utilize proprietary spread spectrum technology to prevent detection and unauthorized access, with optional 128-bit AES encryption available for enhanced security.
Q4: What are the input voltage requirements for the MM2 and N920 series?
A4: The MM2 module operates on +5 VDC (±5%), while the N920, N320, N425, and N1350 modules require 3.3 VDC (±3%).
Q5: Can these radios operate in harsh environmental conditions?
A5: Yes. Every radio is 100% tested for RF performance across an industrial operating temperature range of -40℃ to +80℃ (-40℉ to +185℉).
Q6: What data rates and interfaces do these radios support?
A6: They support RF data rates up to 1.2Mbps (model dependent) and standard data interfaces ranging from 1200bps to 230.4kbps, including RS-232, RS-485, and RS-422 configurations.