0102030405
China Suppliers: Wireless Data Systems Factory for Smart Data Radio & General Data Transmission Modules
DATA Series Product Overview
The DATA series product is complete family of value priced radios for private point-multipoint SCADA and other telemetry applications. They operate at the 130-174MHz, 220-222MHz, 330-512MHz frequency bands. The DATA series are available as board level product or as a packaged unit. The board level product allows Lottery Terminal. The packaged unit comes in a small case that is ready to plug in power, an antenna and your terminal device.
The DATA Series transceivers are designed to help you reduce overall communications cost by providing low power consumption, small size and an inexpensive RF connector.
All DATA series models are available for private labeling.
DATA Series Board Level Units
The DATA series board level unit is a single board measuring approximately 3.5 x 4.75 inches (8.90 x 12.07cm). It comes complete with RF connector and RS-232/485 or TTL interface via a header connector or an edge mounted DB-25. An optional piggyback board is available for RS-485/422 applications.
The board level unit is fully type accepted and includes its own RF shielding. It may be inserted into your device as simply an internal radio, or it can be tightly integrated within the product. By using the processor in your RTU to access radio parameters your abilities. LEDs provide rapid assessment of operating status.
Available Configurations:
- OEM board TTL, 8 Vdc input
- OEM board RS-232, 10-30 Vdc input
- OEM board TTL and piggybacked RS-485, 10-30 Vdc input
Digital Modems:
- 9600bps in 12.5kHz channel
- 19.2kbps in 25kHz channel
Analog Modes:
- Bell 202
- External Modem (4 wire audio) with VOX, switchable Pre-and De-emphasis
DATA Series Packaged Units
DATA Series Packaged Units are the board level unit in a small extruded case, and are available in either RS-232 or RS-485 user interface and a 10-30Vdc input voltage.
FEATURES
- DATA series quality and performance in a value priced data transceiver
- Worldwide product
- FCC and IC 400 MHz
- ETSI 400 MHz (4800 bps)
- SRRC IDH99FJ0 138 200MHz China
- Small size for internal integration as OEM product
- 9600bps throughput
- Low current consumption and sleep modes for solar powered applications
- Flash memory software storage for future upgrades
- Keys on data
- Keyline output for keying external devices on receive
- Noise-free squelch
- CD for CSMA applications
- Easy integration into any OEM equipment
- Configures via HHT, WDS Configuration Software or OEM processor
WDS1510 (MDS EL7051): 130-174MHz
TRM/TRS/TRA400: 410-470MHz
WDS2510 (MDS EL7052): 220-240MHz
TRM/TRS/TRA230: 220-240MHz
WDS4510 (MDS EL7054): 330-512MHz
WDS9510 (MDS EL7054): 800-960MHz
EL705 2Watts (232/485, 9-30V, TNC)
TRM 2Watts (SPI, 3.3V, MMCX)
2Watts Transceiver Board
Enclosed 2/7/25watts
Enclosed 2/7/25watts
Enclosed 2/7/25watts
Special for civil air defense alarm system
Special for civil air defense alarm system
| Operating Frequency | |
| WDS1510/MDS EL7051 | 130-174 MHz |
| WDS2510/MDS EL7052 | 220-240 MHz |
| WDS4510/MDS EL7054 | 330-512 MHz |
| WDS9510/MDS EL7059 | 800-960 MHz |
| TRM/TRS/TRA400 | 410-470 MHz |
| TRM/TRS/TRA230 | 220-240 MHz |
| Radio Type | |
| Synthesized, Simplex or Half Duplex, Channel bandwidth occupied 12.5KHz, Split Freq or Simplex | |
| Primary Power | |
| Voltage: | 10-30VDC (2W), 3.3V(TRM) 10-16VDC (25W), 3.3-45V(TRS) |
| RX Supply Current: | 75mA@13.8VDC |
| TX Supply Current: | 480mA@13.8VDC, 2W |
| Circuit Protection: | 15A self-recovery fuse, built-in polarity reverse protection, power input protection |
| Data Interface | |
| Interface: | RS-232/485 Through DB-25 Connector |
| Interface Port Baud Rates: | 1.2-19.2kbps |
| Over-the-Air Data Rate: | 9.6kbps (Data series) 4.8/9.6/19.2kbps (TRX series) |
| Data Delay: | <15ms |
| Transmission | |
| Frequency Range: | 130-174MHz, 220-240MHz, 330-512MHz, 800-960MHz (Data series), 410-470MHz, 220-240MHz (TRX series) |
| Stepped Frequency: | 5/6.25KHz |
| Modulation Mode: | 4FSK (Data series)/GMSK (TRX series) |
| Carrier Power: | 100mW, 1W, 2W/5W, 15W, 25W |
| Duty Cycle: | 50% (100% additional radiator) |
| Frequency Stability: | 1.5ppm, -40℃ to +70℃ |
| Adjacent Channel Radiation: | -65dB |
| Timeout Timer: | 1-255s |
| Transmitter Keying: | On data |
| Start Time: | <7ms |
| Reception | |
| Frequency Range: | 130-174MHz, 220-240MHz, 330-512MHz, 800-960MHz (Data series), 410-470MHz, 220-240MHz (TRX series) |
| Type: | Double Conversion Superheterodyne |
| Frequency Stability: | 1.5ppm, -40℃ to +70℃ |
| Radiation and Image Suppression: | -70dB |
| Sensitivity: | 12dB SINAD @ -116dBm(19.2kbps), 12dB SINAD @ -119dBm(4.8kbps) |
| Data Performance: | 1x10°-6 @ -108 dBm |
| Intermodulation Rejection: | -70 dB Minimum |
| Adjacent Channel Selectivity: | 60dB |
| Environmental | |
| Temperature Range: | -40℃ to +70℃ |
| Humidity Range: | 95% @ 40 ℃ non condensing |
| Weight | |
| Integrated board: | 135g (2W), 38g (TRS), 34g (TRM) |
| Enclosed: | 821g (blue), 1000g (black) |
| Size | |
| Board Size: | 11.4x9.7x1.9cm (2W), 7.0x1.3x4.8cm (TRM), 8.3x1.3x4.8cm (TRS) |
| Enclosed Size: | 16.9x3.4x11cm (blue), 18.4x14.3x5cm (black) |
| Enclosed Type: | Aluminum |
| Parts | |
|
Built in power amplifier module (maximum 25W) PTT (Push-to-Talk) Multichannel board (16CH) Ethernet (IP) upgrade interface board |
|
| Mounting dimensions of integrated board (data series) | |
|
|
| Radio access type approval code of Radio Administration Bureau of Ministry of industry and information technology of China: 2012FP6383 | |
Frequently Asked Questions (FAQ)
What frequency bands do the DATA series products operate on?
The DATA series radios operate across the 130-174MHz, 220-222MHz (or 220-240MHz depending on the model), 330-512MHz, and 800-960MHz frequency bands.
What is the size of the DATA series board level unit?
The single board level unit measures approximately 3.5 x 4.75 inches (8.90 x 12.07cm), making it compact enough for easy integration into OEM equipment.
What user interfaces are supported by the packaged and board level units?
They support RS-232, RS-485, or TTL user interfaces. Packaged units are available in either RS-232 or RS-485 configurations and accept a 10-30Vdc input voltage.
Are these transceivers suitable for solar-powered applications?
Yes, the DATA series is designed with low current consumption and sleep modes, making them ideal for solar-powered telemetry and SCADA systems.
What is the operating temperature range for these devices?
The devices can operate in extreme environments with a temperature range of -40℃ to +70℃ and a humidity range of up to 95% at 40℃ (non-condensing).