Leave Your Message
Products Categories
Featured Products

China iNET300/iNET900 Long-Range Wireless IP/Ethernet Solution from Reliable Suppliers and Factory

,

The iNET300/iNET900 is an advanced long-range, high-speed industrial wireless IP/Ethernet solution, designed to meet the needs of businesses in China and around the globe. This robust product enables seamless data transmission over Ethernet or through a serial gateway to IP-based networks, facilitating the transfer of critical revenue-generating information from fixed assets such as oil and gas wells, compressor stations, pipelines, fluid storage tanks, and utility meters. Additionally, it provides mobile network access for operations in vehicle-based scenarios.

,

Utilizing cutting-edge 340/900MHz FHSS technology, the iNET300/iNET900 operates license-free within the 336-344/902-928MHz ISM band. With an impressive range of up to 90 miles (line-of-sight)2 and over-the-air data rates of up to 512Kbps/1Mbps, this solution is ideal for suppliers and factories operating in Class 1, Division 2, Groups A, B, C&D hazardous locations1. Experience reliable connectivity and enhanced operational efficiency with the iNET300/iNET900.

,

    Performance & Range

    Long range capability up to 90 miles with high speed configurations:

    • Up to 512Kbps (iNET300)
    • Up to 1Mbps (iNET900)

    Secure Networking

    Multiple layers of cyber-security protection including:

    • AES-128 encryption
    • RADIUS authentication

    Connectivity & Migration

    Ethernet and serial interfaces allow easy migration of legacy serial devices to IP networks. Features plug & play connectivity requiring virtually no setup.

    Industrial Grade

    Built for extreme environments with UL Class 1 Div 2 certification and extended temperature range. License-free operation allows immediate deployment.

    VLAN & Traffic Flow

    VLAN capability (802.1Q) allows multiple segregated data flows over a single radio link.

    Key Applications

    • Long range wireless Ethernet
    • Gateway for serial/legacy networks and devices to IP
    • Video and/or voice-over-IP
    • Mobile network access for vehicle-based operations

    Why Use An iNET Wireless Networking Solution?

    Longest Range

    Industrial product in its class providing the lowest cost of ownership.

    Secure Operation

    Multiple layers of protection, including a 340/900MHz physical layer, RADIUS authentication, and AES-128 data encryption with automatic key rotation.

    Reliable Design

    Designed and built for low failure rates and reduced maintenance costs.

    P21 Protection

    The P21 protected Access Point (two radios in a cold standby configuration) increases the availability of mission-critical networks. P21 Remote stations can also form protected point-to-point links.

    Flexible Connections

    Supports multiple users connecting to multiple applications via multiple protocols on the same unit or network simultaneously.

    Future Proof

    Adheres to open standards, allowing it to interface with a wide range of external devices enabling both new and old technologies to communicate.

    Comprehensive Network Management

    Compatible with NETview MS™ and any standard off-the-shelf SNMP management system.

    Technical Specifications

    Specification Block Details
    General
    Data Rate 256Kbps/512Kbps (iNET300)
    512Kbps/1Mbps (iNET900)
    User configurable air link
    1,200 - 115.2 bps serial ports
    Frequency Band 336-344 MHz ISM band (iNET300)
    902-928 MHz ISM band (iNET900)
    Spreading Mode DTS/FHSS
    Range (iNET300-256Kbps) Typical fixed range: 25 miles
    Maximum fixed range: 90 miles
    Typical mobile range (parked): 8 miles
    Typical mobile range (moving): 5 miles
    Range (iNET300-512Kbps) Typical fixed range: 15 miles
    Maximum fixed range: 25 miles
    Range (iNET900-512Kbps) Typical fixed range: 25 miles
    Maximum fixed range: 90 miles
    Typical mobile range (parked): 8 miles
    Typical mobile range (moving): 5 miles
    Range (iNET900-1Mbps) Typical fixed range: 15 miles
    Maximum fixed range: 25 miles
    Available Configurations Access point/remote dual gateway - serial and ethernet
    Remote Ethernet Bridge - Ethernet Only
    Remote Serial Gateway - serial only
    P21 protected station - two radios in one chassis (cold standby)
    Radio Specifications
    iNET 300
    System Gain 150dB @ 256 Kbps
    140dB @ 512 Kbps
    Carrier Power 0.5 to 5 / 5 to 25 watt
    Modulation CPFSK (continuous phase FSK)
    Receiver -101dBm @ 256 Kbps with 10-6 BER
    -97dBm @ 512 Kbps with 10-6 BER
    iNET 900
    System Gain 139dB @ 512Kbps
    134dB @ 1Mbps
    Carrier Power 0.1 to 1 / 1 to 15 watt
    Output Impedance 50 Ohms
    Occupied Bandwidth 600 kHz
    Modulation CPFSK (continuous phase FSK)
    Receiver Sensitivity -97dBm @ 512 Kbps with 10-6 BER
    -92dBm @ 1Mbps with 10-6 BER
    Physical Interfaces
    Ethernet 10BaseT, RJ-45
    Serial COM1: RS-232/485/V.24, DB-9F, DCE
    COM2: RS-232/485/V.24, DB-9M, DCE
    Antenna TNC connector (female)
    LEDs Lan, Com1, Com2, power, link
    Protocols
    Wireless CSMA/CA (Collision Avoidance)
    Ethernet IEEE 802.3, Ethernet II, Spanning Tree (Bridging), IGMP
    TCP/IP DHCP, ICMP, UDP, TCP, ARP, Multicast, SNTP, TFTP
    Serial PPP, Encapsulation over IP (tunneling) for serial async multidrop protocols including Modbus, DNP.3, DF1, BSAP
    Optional Allen-Bradley EtherNET/IP*, Modbus/TCP
    Cyber Security Suite, Level 4
    Encryption AES-128 with automatic key rotation
    Authentication 802.1x, RADIUS, EAP/TLS, PKI, PAP, CHAP
    Management SSL, SSH, HTTPS
    Traffic Segregation 802.1Q VLAN
    Management
    Supported Methods HTTP, HTTPS, SSH, TELNET, local console
    SNMPv1/v2/v3, MIB II, Enterprise MIB
    SYSLOG
    NETview MS™
    Environmental
    Temperature -40°C to +70°C (-40°F to +158°F)
    Humidity 95% at 40°C (104°F) non-condensing
    Electrical
    iNET 300
    Input Voltage 10.5-16Vdc
    Current Consumption (Nominal) Transmit: 1.2A (5W RF Output) / 5.0A (25W RF Output)
    Receive: 203mA
    iNET 900
    Input Voltage 10.5-30Vdc (1W), 10.5-16Vdc (15W)
    Current Consumption (Nominal) Transmit: 510mA / 290mA (1W) @ 13.8Vdc/24Vdc, 5.0A (15W RF Output)
    Receive: 200mA @ 13.8Vdc / 120mA @ 24Vdc
    Mechanical
    Case Die Cast Aluminum
    Dimensions iNET 300: 3.8H x 20.3W x 10.2D cm (5W) / 5.0H x 20.3W x 10.2D cm (25W)
    iNET 900: 3.15H x 17.2W x 11.2D cm (1W) / 5.0H x 20.3W x 10.2D cm (15W)
    Weight iNET 300: 1kg (5W), 1.2kg (25W)
    iNET 900: 908g (1W), 1.2kg (15W)
    Mounting Options Flat surface mount brackets, DIN rail, 19" rack tray
    P21 Option
    Case & Weight Steel (rack mountable 2U), 7.6kg (14.7lbs) with transceivers
    Dimensions 8.9H x 48.3W x 35.6D cm (3.5H x 19W x 14D in)
    Agency Approvals
    Certifications FCC Part 15.247, UL/CSA Class 1 Div.2, IC

    Frequently Asked Questions (FAQ)

    What is the maximum communication range of the iNET wireless solution?

    The iNET wireless solution offers an exceptional long-range capability of up to 90 miles for fixed configurations under optimal conditions, and up to 8 miles for mobile operations when parked.

    What frequency bands do the iNET300 and iNET900 systems utilize?

    The iNET300 operates on the 336-344 MHz ISM band, while the iNET900 operates on the 902-928 MHz ISM band. Both systems utilize DTS/FHSS spreading modes and are license-free for immediate deployment.

    How does the iNET system secure wireless data transmission?

    The system features Level 4 Cyber Security Suite, including AES-128 encryption with automatic key rotation, RADIUS authentication (802.1x, EAP/TLS, PKI), and secure management protocols like HTTPS and SSH.

    Can legacy serial devices connect to modern IP networks using iNET?

    Yes. The iNET provides both Ethernet and serial interfaces (COM1/COM2 supporting RS-232/485) and encapsulates serial async multidrop protocols (like Modbus, DNP.3, and DF1) over IP networks.

    What is the purpose of the P21 protected Access Point configuration?

    The P21 configuration houses two radios in a single chassis under a cold standby configuration. This setup significantly increases the network availability for mission-critical point-to-multipoint or point-to-point links.

    Is the iNET system suitable for harsh industrial environments?

    Absolutely. The iNET features an extended operating temperature range of -40°C to +70°C (-40°F to +158°F) and holds UL/CSA Class 1 Div 2 agency approvals for hazardous locations.