0102030405
China iNET300/iNET900 Long-Range Industrial Wireless IP/Ethernet Solution - Trusted Suppliers & Factory
Key Features
-
Long range - Up to 90 miles
-
High speed - Up to 512Kbps (iNET300) / Up to 1Mbps (iNET900)
-
Secure - Multiple layers of cyber-security including: AES-128 encryption and RADIUS authentication
-
Ethernet and serial interfaces allow migration of existing serial devices to IP networks
-
Industrial grade performance - UL Class 1 Div 2 & extended temperature range for extreme environments
-
License free - Deploy immediately
-
Plug and play connectivity - Configuration requires virtually no setup
-
VLAN capability (802.1Q) allows multiple segregated data flows over a single radio
-
Long range wireless Ethernet
-
Gateway for serial/legacy networks and/or devices to IP network
-
Video and/or voice-over-IP
-
Mobile network access for vehicle-based operation
Why Use an iNET Wireless Solution?
-
Longest range - Industrial product in its class, providing lowest cost of ownership.
-
Secure - Wireless operation with multiple layers of protection, including a 340/900MHz physical layer, RADIUS authentication, and AES-128 data encryption with automatic key rotation.
-
Reliable - Designed and built for low failure rates and reduced maintenance costs.
-
Protected Architecture - The P21 protected Access Point (a chassis housing two radios in a cold standby configuration) increases the availability of mission-critical point-to-multipoint networks. P21 Remote stations can also be used to form protected point-to-point links.
-
Flexible - The iNET supports multiple users connecting to multiple applications via multiple protocols on the same iNET unit or the same network - simultaneously!
-
Future proof - The iNET adheres to open standards, allowing it to interface with a wide range of external devices enabling both new and old technologies to communicate.
-
Comprehensive Network Management - Compatible with NETview MS™ and any standard off-the-shelf SNMP management system.
Technical Specifications
General
Data Rate:
256Kbps/512Kbps (iNET300)
512Kbps/1Mbps (iNET900)
User configurable air link
1,200-115.2 bps serial ports
Frequency Band:
336-344 MHz ISM band (iNET300)
902-928 MHz ISM band (iNET900)
Spreading Mode:
DTS/FHSS
Range (iNET300-256Kbps):
Typical fixed range: 25 miles
Maximum fixed range: 90 miles
Typical mobile range (parked): 8 miles
Typical mobile range (moving): 5 miles
Range (iNET300-512Kbps):
Typical fixed range: 15 miles
Maximum fixed range: 25 miles
Range (iNET900-512Kbps):
Typical fixed range: 25 miles
Maximum fixed range: 90 miles
Typical mobile range (parked): 8 miles
Typical mobile range (moving): 5 miles
Range (iNET900-1Mbps):
Typical fixed range: 15 miles
Maximum fixed range: 25 miles
Available Configurations:
Access point/remote dual gateway - serial and ethernet
Remote Ethernet Bridge - Ethernet Only
Remote Serial Gateway - serial only
P21 protected station - two radios in one chassis (cold standby)
Radio Specs
iNET 300
System Gain:
150dB @ 256 Kbps
140dB @ 512 Kbps
140dB @ 512 Kbps
Carrier Power:
0.5 to 5 / 5 to 25 watt
Modulation:
CPFSK (continuous phase FSK)
Receiver:
-101dBm @ 256 Kbps with 10-6 BER
-97dBm @ 512 Kbps with 10-6 BER
-97dBm @ 512 Kbps with 10-6 BER
iNET 900
System Gain:
139dB @ 512Kbps
134dB @ 1Mbps
134dB @ 1Mbps
Carrier Power:
0.1 to 1 / 1 to 15 watt
Output Impedance:
50 Ohms
Occupied Bandwidth:
600 kHz
Modulation:
CPFSK (continuous phase FSK)
Receiver Sensitivity:
-97dBm @ 512 Kbps with 10-6 BER
-92dBm @ 1Mbps with 10-6 BER
-92dBm @ 1Mbps with 10-6 BER
Physical Interfaces & Protocols
Physical Interfaces
Ethernet:
10BaseT, RJ-45
Serial:
COM1: RS-232/485/V.24, DB-9F, DCE
COM2: RS-232/485/V.24, DB-9M, DCE
COM2: RS-232/485/V.24, DB-9M, DCE
Antenna:
TNC connector (female)
LEDs:
Lan, Com1, Com2, power, link
Protocols
Wireless:
CSMA/CA (Collision Avoidance)
Ethernet:
IEEE 802.3, Ethernet II, Spanning Tree (Bridging), IGMP
TCP/IP:
DHCP, ICMP, UDP, TCP, ARP, Multicast, SNTP, TFTP
Serial:
PPP, Encapsulation over IP (tunneling) for serial async multidrop protocols including Modbus, DNP.3, DF1, BSAP
Optional:
Allen-Bradley EtherNET/IP* - Modbus/TCP
Cyber Security & Management
Cyber Security Suite, Level 4
Encryption:
AES-128 with automatic key rotation
Authentication:
802.1x, RADIUS, EAP/TLS.PKI, PAP, CHAP
Management:
SSL, SSH, HTTPS
Traffic Segregation:
802.1Q VLAN
Management System
Methods:
HTTP, HTTPS, SSH, TELNET, local console
SNMPv1/v2/v3, MIB II, Enterprise MIB
SYSLOG
NETview MS™
Environmental & Electrical
Environmental
Temperature:
-40℃ to +70℃ (-40°F to +158°F)
Humidity:
95% at 40℃ (104°F) non-condensing
Electrical Specs
iNET 300
Input Voltage:
10.5-16Vdc
Current Consumption:
| Mode | 13.8Vdc |
|---|---|
| Transmit | 1.2A (5W RF Output) 5.0A (25W RF Output) |
| Receive | 203mA |
iNET 900
Input Voltage:
10.5-30Vdc (1W), 10.5-16Vdc (15W)
Current Consumption:
| Mode | 13.8Vdc | 24Vdc |
|---|---|---|
| Transmit | 510mA / 290mA (1W) | 5.0A (15W RF Output) |
| Receive | 200mA | 120mA |
Mechanical & Agency Approvals
Mechanical
Case:
Die Cast Aluminum
Dimensions (iNET 300):
3.8H x 20.3W x 10.2D cm (5W)
5.0H x 20.3W x 10.2D cm (25W)
5.0H x 20.3W x 10.2D cm (25W)
Dimensions (iNET 900):
3.15H x 17.2W x 11.2D cm (1W)
5.0H x 20.3W x 10.2D cm (15W)
5.0H x 20.3W x 10.2D cm (15W)
Weight:
iNET 300: 1kg (5W), 1.2kg (25W)
iNET 900: 908g (1W), 1.2kg (15W)
iNET 900: 908g (1W), 1.2kg (15W)
Mounting:
Flat surface mount brackets, DIN rail, 19" rack tray
P21 Option:
Case Steel (rack mountable 2U)
Dimensions: 8.9H x 48.3W x 35.6D cm (3.5H x 19W x 14D in)
Weight: 7.6kg (14.7lbs) with transceivers
Dimensions: 8.9H x 48.3W x 35.6D cm (3.5H x 19W x 14D in)
Weight: 7.6kg (14.7lbs) with transceivers
Agency Approvals
Certifications:
FCC Part 15.247
UL/CSA Class 1 Div.2
IC
Frequently Asked Questions (FAQ)
What is the maximum communication range of the iNET wireless solution?
The iNET system offers an exceptional long-range capability, reaching up to 90 miles for fixed configurations under optimal conditions, depending on the specific frequency band (iNET300 or iNET900) and data rate selected.
What data speeds and frequency bands do the iNET300 and iNET900 support?
The iNET300 operates in the 336-344 MHz ISM band with data rates up to 512Kbps. The iNET900 operates in the 902-928 MHz ISM band and supports higher speeds up to 1Mbps. Both configurations offer a user-configurable air link.
How does the iNET system secure wireless data transmissions?
The system features a robust Level 4 Cyber Security Suite that includes AES-128 encryption with automatic key rotation, RADIUS authentication, 802.1x, EAP/TLS.PKI, PAP/CHAP authentication, and secure management protocols like SSL, SSH, and HTTPS.
Can I integrate legacy serial devices into modern IP networks using this solution?
Yes, the iNET wireless solution acts as a gateway, offering Ethernet (10BaseT) and dual serial interfaces (COM1/COM2 supporting RS-232/485) to seamlessly migrate existing legacy serial devices to IP networks.
What industrial certifications and environmental ratings does the iNET system hold?
The iNET is designed for extreme environments with an extended operating temperature range of -40°C to +70°C. It is built with a die-cast aluminum case and holds agency approvals including FCC Part 15.247, IC, and UL/CSA Class 1 Division 2 certification.
What is the purpose of the P21 protected station configuration option?
The P21 option houses two radios in a single cold standby configuration chassis. This design increases the overall availability and reliability of mission-critical point-to-multipoint networks and can also be used to form protected point-to-point links.