Leave Your Message

MIMOmesh Series of OEM Module

Oem Built-In Integrated Extreme Design For Mesh Networking In Harsh Environments

2 Watts ×2/4 Watts ×2 Transmission Power, Small Size, Light Weight

Rich Interface, Built-In Network Port, Serial Port, High Fidelity (G.722) Intercom Call

    Long Distance, High Speed, Flexible Networking, Strong Anti-Interference Ability

    General

    Waveform/SDR Platform

    Mobile network MANET+MIMO/9361+7Z030 or 7Z100 (maximum 40MHz BW)

    MIMO Technology

    Space-time coding、Receive Diversity、TX /RX beamforming、Spatial multiplexing

    Receive Sensitivity

    -103dBm@5MHz BW

    Channel Bandwidth

    2.5/5/10/20MHz setting, 40MHz optional; FDD by dual-antennas with two-frequencys transceiver (Carrier Aggregation) optional

    Data Rate

    1-100Mbps(20MHz BW)/180Mbps (40MHz BW) Adaptive,QoS

    Modulation Mode

    TD-COFDM,BPSK/QPSK/16QAM/64QAM/256QAM/1024QAM Adaptive (Fixed setting optional)

    RF Output Power

    (Support TPC, transmisson power control)

    2Watts×2

    4Watts×2

    Single Hop

    Communication Distance

    100-300 KM (LOS), 1-30 KM (urban area)

    Mode

    Distributed centerless Point-to-point/Point-to-multipoint/Multipoint-to-multipoint,

    Layer 2 or 3 of Dynamic routing、Multi-hop relay, Star/Line/Network/Hybrid

    Single Hop Delay

    Average 7mS (20MHz BW)

    Encryption

    DES, AES128/256, SNOW3G/ZUC optional, Chip/TF card encryption customized or external encryption machine

    Anti-jamming Mode

    Manual spectrum scanning channel selection, Full band enhanced intelligent frequency selectting(spectrum awareness)/Full band adaptive frequency hopping/Roaming mode optional

    Local/Remote

    Management

    Operating frequency, channel bandwidth, network ID, transmit power and other parameter settings, spectrum scanning, real-time display and statistical records of network topology, link field strength signal-to-noise ratio, upload and download traffic,node distance, GPS/Beidou electronic map, temperature/voltage/jamming Monitoring, software upgrade. Remote silence and wake-up optional

    Others

    The startup time is less than 28 seconds, and the network access/update/switchover time is less than 1 second.
    There is no limit on the user capacity of a single system (256 nodes or more) and the number of hops in Mesh networks (Data 15+ hops, voice 10+ hops, video 8+ hops). The total bandwidth loss for three hops and above is less than 70%.
    Automatic carrier tracking, adapted to a Doppler frequency deviation of ± 6kHz frequency offset, supports mobile communication at speeds above 7200 kilometers per hour (6 Mach, 2000 meters per second).

    Bands(70M-6GHz. 2T2R at single band, or 1T2R at dual band selectable/smart change*)

    BAND

    Frequency range (MHz)

    BAND

    Frequency range (GHz)

    UHF

    430-550/570-700/800-950, 225-400/320-470*

    S Band

    2.0-2.2/2.2-2.5/2.5-2.7/2.7-2.9, 1.6-2.3/1.9-2.7*

    L Band

    1000-1200/1300-1500/1600-1800/1800-2000, 1200-1700*

    C Band             

    4.4-5.0/5.25-5.85, 4.2-5.2/5.5-6.0*

    MIIT

    336-344/512-582/566-626/606-678/1420-1520/1430-1444

    Environmental

    Operation Temperature

    -40℃ ~+80℃

    Protection Level

    N/A

    Mechanical

    Size/Weight

    10.1x5.4x1.9cm/123.5g

    Color

    Silver

    Installation

    4 Mounting Holes

    Power

    Supply Voltage

    9-24/12-28VDC

    Power consumption

    Operation 1-2A/Standby 0.4-0.6A@12V (2Watts×2)

    Operation 2-4A/Standby 0.5-0.7A@12V (4Watts×2)

    Interface

    RF

    SMP

    Basic interface

    J2(DC Input), J3(1X Ethernet 100/1000BaseT), J5 (Voice Intercom), J6(1xRS232/1xRS485, 1.2-115.2Kbps)

    Push to talk/Auxiliary interface

    MIC, SP, PTT, GND, RS485/422, USB2.0 OTG

    Network Extension Optional

    Public Network Routing/4G LTE, WB-NB integration, Fiber, Satellite

    Video Extension Optional

    Low Delay HDMI/SDI/CVBS, 4K/2K/1080P/720P/D1

    Link Status Indicator

    Steady red - The network is not connected

    Blinking red - Starting/not connected to the network

    Steady green - The network is connected

    Blinking green - Voice PTT is down

    RSSI Link Indicator

    Steady green - The link quality is excellent

    Steady Blue - The link quality is good

    Steady yellow - The link quality is medium

    Steady purple - The link quality is slightly worse

    Steady red - The link quality is poor or link is down

    Management Interface/Control Interface

    Web-based network management/GUI, API for secondary development interface/SNMP

    Built WiFi

    Dimensions 1
    Two PCB boards are sandwiched between three metal plates. The purpose of the metal plate is to absorb and shield the PCB from electromagnetic interference. The RF part of the OEM module has two SMP connectors. The SMP-TNC female RF cable is provided by default. For details about the power supply ports and data ports on the OEM interface board, see "6.OEM Interface Board Definition ".
    interface board
    OEM modules require 5-24W power consumption depending on the transmission period, transmission power, and frequency band used. All heating components are tightly connected to the metal shield by means of cooling materials. Baseband board (the larger board at the bottom) power consumption is fixed at 5W. The remaining power consumption is generated by the RF board (the top board). Heat dissipation is recommended on the top and bottom of the OEM module.

    Your Name*

    Phone Number

    Country

    Remarks*

    reset