Leave Your Message

iNET Series of Network Radio

The iNET300/iNET900 is a long-range, high-speed, industrial, wireless IP/Ethernet solution. It allows customers to bring business information over Ethernet or a serial gateway and onto IP based networks. This includes mission-critical. Revenue generating data from fixed assets such as oil and gas wells, compressor stations, pipelines. fluid storage tanks and utility meters. It also enables mobile network access for vehicle-based operation.

The iNET300/iNET900 uses advanced 340/900MHz FHSS technology for license-free operation in the 336-344/902-928MHz ISM band. It is capable of up to 90mile range (line-of-sight)2 and up to 512Kbps/1Mbps over-the-air data rate communications. This product is available for use in Class 1, Division 2, Groups A, B, C&D hazardous locations.1 

    Long range - Up to 90 miles
    High speed - Up to 512Kbps(iNET300)
    Up to 1Mbps(iNET900)
    Secure - multiple layers of cyber-security including:
    AES-128 encryption
    RADIUS authentication
    Ethernet and serial interfaces allow migration of existing serial devices to IP networks  
    Industrial grade performance - UL Class 1 Div 21 &extended temperature range for extreme environments
    License free - deploy immediately
    Ploy and play connectivity - configuration requires virtually no setup
    VLAN capability (802.1Q) allows multiple segregated data flows over a single radio
    Long range wireless Ethernet
    Gateway for serial/legacy networks and/or devices to IP network
    Video and/or voice-over-IP
    Mobile network access for vehicle-based operation
    WHY USE AN iNET WIRELESS NETWORKING SOLUTION?
    Longest range - industrial product in its closes. Providing lowest cost of ownership.
    Secure - wireless operation with multiple layers of protection, including a 340/900MHz physical layer, RADIUS authentication and AES-128 data encryption with automatic key rotation.
    Reliable - Designed and built for low failure rates and reduced maintenance costs.
    Reliable - The P21 protected Access Point (a chassis housing two radios in a cold standby configuration) increases the availability of mission-critical point-to-multipoint networks. P21 Remote stations can also be used to form protected point-to-point links.
    Flexible - The iNET supports multiple users connecting to multiple applications via mule-tiple protocols on the same iNET unit or the same network - simultaneously!
    Future proof - The iNET adheres to open standards, allowing it to interface with a wide range of external devices enabling both new and old technologies to communicate.
    Comprehensive Network Management - Compatible with NET view MSTM and any standard off-the-shelf SNMP management system.

    General

    Data Rate:

     

    256Kbps/512Kbps (iNET300)

    512Kbps/1Mbps (iNET900)

    user configurable air link

    1,200-115.2 bps serial ports

    Frequency Band:

     

    336-344 MHz ISM band (iNET300)

    902-928 MHz ISM band (iNET900)

    Spreading Mode:

     

    DTS/FHSS

    Range(iNET300-256Kbps):

     

    Typical fixed range: 25miles

    Maximum fixed range: 90miles

    Typical mobile range(parked): 8miles

    Typical mobile range(moving): 5miles

    Range (iNET300-512Kbps):

     

    Typical fixed range: 15miles

    Maximum fixed range: 25miles

    Range (iNET900-512Kbps):

     

    Typical fixed range: 25miles

    Maximum fixed range: 90miles

    Typical mobile range(parked): 8miles

    Typical mobile range(moving): 5miles

    Range (iNET900-1Mbps):

     

    Typical fixed range: 15miles

    Maximum fixed range: 25miles

    Available Configurations:

     

    Access point/remote dual gateway - serial and ethernet

    Remote Ethernet Bridge - Ethernet Only

     

    Remote Serial Gateway - serial only

    P21 protected station - tow radios in one chassis (cold standby)

     

    Radio

          iNET 300

    System Gain:

     

    150dB@256 Kbps

    140dB@512 Kbps

    Carier Power:

     

    0.5 to 5 / 5 to 25 watt

    Modulation:

     

    CPFSK(continuous phase FSK)

    Receiver:

     

    -101dBm@256 Kbps with 10-6 BER

    -97dBm@512 Kbps with 10-6 BER

          iNET 900

    System Gain:

     

    139dB@512Kbps

    134dB@1Mbps

    Carier Power:

     

    0.1 to 1 / 1 to 15 watt

    Output Impedance:

     

    50 Ohms

    Occupied Bandwidth:

     

    600 kHz

    Modulation:

     

    CPFSK(continuous phase FSK)

    Receiver Sensitivity:

     

    -97dBm @ 512 Kbps with 10-6 BER

    -92dBm @1Mbps with 10-6 BER

    Physical Interfaces

    Ethernet:

     

    10BaseT, RJ-45

    Serial:

     

    COM1: RS-232/485/V.24, DB-9F, DCE

    COM2: RS-232/485/V.24, DB-9M, DCE

    Anternna:

     

    TNC connector(female)

    LEDs:

     

    Lan, Com1, Com2, power, link

     

    Protocols

    Wireless:

     

    CSMA/CA(Collision Avoidance)

    Ethernet:

     

    IEEE 802.3. Ethernet II, Spanning

    Tree (Bridging), IGMP

    TCP/IP:

     

    DHCP, ICMP, UDP, TCP, ARP, Multicast, SNTP, TFTP

    Serial:

     

    PPP, Encapsulation over IP (tunneling) for serial async multidrop protocols including Modbus.DNP.3.DF1, BSAP

    Optional:

     

    Allen- Bradley EtherNET/IP* -Modbus/TCP

     

    Cyber Security Suite, Level 4

    Encryption:

     

    AES-128 with automatic key rotation

    Authentication:

     

    802.1x, RADIUS, EAP/TLS.PKI, PAP, CHAP

    Management:

     

    SSL, SSH, HYYPS

    Traffic Segregation:

     

    802.1Q VLAN

     

    Management

     

    HTTP, HTTPS, SSH, TELNET, local console

     

    SNMPv1/v2/v3, MIB II, Enterprise MIB

     

    SYSLOG

     

    NETview MSTM

     

    Environmental

    Temperature:

     

    -40℃to +70℃ (-40°F to +158°F)

    Humidity:

     

    95% at 40℃(104°F) non-condensing

    Electrical

          iNET 300

    Input Voltage:

     

    10.5-16Vdc

    Current Consumption(nominal):

     

    Mode

    13.8Vdc

     

    Transmit

     

    1.2A(5W RF Output)

    5.0A(25W RF Output)

     

    Receive

    203mA

          iNET 900

    Input Voltage:

     

    10.5-30Vdc(1W), 10.5-16Vdc(15W)

    Current Consumption(nominal):

     

    Mode

    13.8Vdc

    24Vdc

     

    Transmit

     

    510mA          290mA(1W)

    5.0A(15W RF Output

     

    Receive

    200mA

    120mA

     

    Mechanical

    Case Die Cast Aluminum

    Dimensions:

          iNET 300

     

    3.8H x 20.3W x 10.2D cm(5W)

    5.0H x 20.3W x 10.2D cm(25W)

          iNET 900

     

    3.15H x 17.2W x 11.2D cm(1W)

    5.0H x 20.3W x 10.2D cm(15W)

    Weight:

          iNET 300

     

    1kg(5W), 1.2kg(25W)

          iNET 900

     

    908g(1W), 1.2kg(15W)

    Mounting Options.

     

    Flat surface mount brackets.

    DIN rail, 19' rack tray

    P21 Option:

     

    Case Steel (rack mountable 2U)

     

    Dimensions:

    8.9H x 48.3W x 35.6D cm

    (3.5H x 19W x 14D in)

     

    Weight:

    7.6kg, (14.7lbs)with transceivers

     

    Agency Approvals

    FCC Part 15.247

    UL/CSA Class 1 Div.21

    IC

    Graphics 1
    Graphics 2