Leave Your Message

Built WiFi/HDMI/5G

SmartMesh is based on the high performance software Radio (SDR) platform solution. It is a high-power OEM product with small size, light weight, rich functions, flexible networking, 2x2 MIMO and rich frequency band. Designed for high-speed mobile wireless applications, it offers 10/100 network ports and dual serial ports.
The SmartMesh network has the advantages of large scale, high transmission rate, long communication distance, fast route switching, fast network access, small delay, and high security performance. Suitable for various industry applications: drones, robotics, emergency, fire, high-speed backbone, IP video surveillance, Voice over IP (VoIP), public network extension, traditional network, SCADA, telemetry, multicast video.
The SmartMesh is configured using the built-in WebUI interface and does not require any additional software or tools. The radio can run in various working modes, and supports frequency hopping and intelligent frequency selection.

    General

    Waveform/SDR Platform

    Mobile Network MANET/9363 or 9361+7Z020

    MIMO Technology

    Space-time coding、Receive Diversity、TX /RX beamforming

    Receive Sensitivity

    -103dBm@5MHz BW

    Channel Bandwidth

    1.25/2.5/5/10/20MHz setting

    Data Rate

    1-70Mbps(10MHz BW) Adaptive, QoS

    Modulation Mode

    TD-COFDM, BPSK/QPSK/16QAM/64QAM Adaptive(Fixed setting optional)

    RF Output Power

    (Support TPC, transmisson power control)

    0.5Watts x2

    1Watts x2

    2Watts x2

    Single Hop

    Communication Distance

    Air to G. 10-30KM(0.5Watts x2)、20~50/50~150KM(1Watts x2/2Watts x2)

    Mode

    Distributed centerless Point-to-point/Point-to-multipoint/Multipoint-to-multipoint,

    Layer 2 or 3 of Dynamic routing、Multi-hop relay, Star/Line/Network/Hybrid

    Single Hop Delay

    Average 7mS (20MHz BW)

    Encryption

    DES, AES128/256, SNOW3G/ZUC optional, Chip/TF card encryption customized or external encryption machine

    Anti-jamming Mode

    Manual spectrum scanning channel selection, Full band enhanced intelligent frequency selectting(spectrum awareness)/Full band adaptive frequency hopping/Roaming mode optional

    Local/Remote Management

    Operating frequency, channel bandwidth, network ID, transmit power and other parameter settings, spectrum scanning, real-time display and statistical records of network topology, link field strength signal-to-noise ratio, upload and download traffic,node distance, GPS/Beidou electronic map, temperature/voltage/jamming Monitoring, software upgrade. Remote silence and wake-up optional

    Others

    The startup time is less than 28 seconds, and the network access/update/switchover time is less than 1 second.
    There is no limit on the user capacity of a single system (256 nodes or more) and the number of hops in Mesh networks (Data 15+ hops, voice 10+ hops, video 8+ hops). The total bandwidth loss for three hops and above is less than 70%.
    Automatic carrier tracking, adapted to a Doppler frequency deviation of ± 6kHz frequency offset, supports mobile communication at speeds above 7200 kilometers per hour (6 Mach, 2000 meters per second).

    Bands(70M-6GHz. 2T2R at single band, or 1T2R at dual band selectable/smart change*)

    BAND

    Frequency range (MHz)

    BAND

    Frequency range (GHz)

    UHF

    430-550/570-700/800-950, 225-400/320-470*

    S Band

    2.0-2.2/2.2-2.5/2.5-2.7/2.7-2.9, 1.6-2.3/1.9-2.7*

    L Band

    1000-1200/1300-1500/1600-1800/1800-2000, 1200-1700*

    C Band

    4.4-5.0/5.25-5.85, 4.2-5.2/5.5-6.0*

    MIIT

    336-344/512-582/566-626/606-678/1420-1520/1430-1444

    Environmental

    Operation Temperature

    -40℃ ~+80℃

    Protection Level

    IP66, IP67/IP68 Customized

    Mechanical

    Size/Weight

    8.7×5.4×1.0cm/40g (1Watts×2 Module)

    9.7×5.4×1.0cm/60g (2Watts×2 Module)

    6.2x4.8x1.0cm/50 (Mainboard 25)g (0.5Watts×2 Module, SM-mini)

    Color

    Black、Lron Gray、Army Green Optional

    Installation

    4 Mounting Holes

    Power

    Supply Voltage

    9-32VDC (0.5Watts×2)

    9-39VDC (1Watts×2)

    12-36VDC (2Watts×2)

    Power consumption

    Operation 0.3-0.5A/Standby 0.2-0.3A@12V(0.5Watts×2)

    Operation 0.5-1A/Standby 0.4-0.6A@12V (1Watts×2)

    Operation 1-2A/Standby 0.5-0.7A@12V (2Watts×2)

    Power Selection

    Power Supply by Twist-Lock Battery or Main Cable

    Interface

    Basic interface

    RF: MMCX×2 (2×TRx), J1 (DC input), J4 (Ethernet business, data channel), J7 (serial port 0, serial port 1 RS-232 level), external power amplifier control line

    Push to talk/Auxiliary interface

    MIC, SP, PTT, GND, RS485/422, USB2.0 OTG

    Network Extension Optional

    Public Network Routing/4G LTE, WB-NB integration, Fiber, Satellite

    Video Extension Optional

    Low Delay HDMI/SDI/CVBS, 4K/2K/1080P/720P/D1

    Link Status Indicator

    Steady red - The network is not connected

    Blinking red - Starting/not connected to the network

    Steady green - The network is connected

    Blinking green - Voice PTT is down

    RSSI Link Indicator

    Steady green - The link quality is excellent

    Steady Blue - The link quality is good

    Steady yellow - The link quality is medium

    Steady purple - The link quality is slightly worse

    Steady red - The link quality is poor or link is down

    Management Interface/Control Interface

    Web-based network management/GUI, API for secondary development interface/SNMP

    SmartMesh OEM module, very high level of integration, only one PCB board. (Including RF power amplifier, SDR digital circuit, shielding cover, antenna interface, power supply, data interface, etc.)

    1Wattsx2/2Wattsx2

    1Wattsx2&2Wattsx2 2
    0

    Your Name*

    Phone Number

    Country

    Remarks*

    reset