Bi-Directional RF Amplifier BiAMP-VHF/UHF/L band/S band/C band
1.30MHz-5.0GHz,supports 1×1、2×2 MIMO, integrated transmitting and receiving
2.Supports any signal type and any modulation mode, including 3-5G telecom, WLAN, OFDM, DVB and CW/AM/FM/GMSK/BPSK/QPSK/16QAM/64QAM
3.High power spectral density, high efficiency and high linearity, single channel output up to 50W
4.RX band pass filtering,minimum 9dB gain noise floor amplification with less than 3dB noise figure
5.Automatic Rx/Tx switching/external Tx-Rx trigger (based on user requirements), and the switching time is less than 2μs
6.Automatic gain control, CPLD timing control, 90℃ high temperature automatic protection and other perfect protection design
7.Tx/Rx indicator, wide voltage input
8.Small size, light weight, stable and reliable
Frequency |
225-400/400-450/450-550/570-700/840-845/902-928/960-1170/ 1300-1500/1980-2200/2400-2483/2200-2500/4400-4700/ 4700-5000/5030-5100/5725-5875/5150-5250MHz |
|
TX Power Gain |
20-27dB(Psat=+44dBm) |
|
RX Gain |
9-11dB(Gain FCat ness<1.5dB) |
|
802.11g, FEC |
Modulation Mode (Data Rate @20MHz) |
Tx O/P(W) |
3/4 |
QAM64,54Mbps |
8 |
3/4 |
QAM16,36Mbps |
11 |
1/4 |
QPSK,12Mbps |
16 |
1/4 |
BPSK,9Mbps |
20 |
Supply Range/Current |
18-28V/20W, 2.5A@28V |
|
Rx/Tx Switching |
<2μs |
|
Input Signal |
13-20dBm |
|
Impedance |
50Ω |
|
Power Consumption |
≤140W(At 46dBm output) |
|
Connector |
TNC/SMA |
|
Size/Weight |
12.5x9x6.8cm/933.5g 11x12.7x1.6cm/410g |

